Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.XKYnlXRHpwkr1xM/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-06-01T00:30:18+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (254409462 bytes) in 61 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (252M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.XKYnlXRHpwkr1xM/outputfs/dcmem/backup.tar.gz'
Preparing archive operationOK
Archived 7968 MiB in 4201 seconds [avg 1942 KiB/sec]
You should also rm -Rf /tmp/rear.XKYnlXRHpwkr1xM
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.O3SZ0qDMoKtNkhH/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-07-01T00:30:13+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255670959 bytes) in 48 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.O3SZ0qDMoKtNkhH/outputfs/dcmem/backup.tar.gz'
Preparing archive operationOK
Archived 8004 MiB in 4150 seconds [avg 1974 KiB/sec]
You should also rm -Rf /tmp/rear.O3SZ0qDMoKtNkhH
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.J3Cl4HQm9A6Ysqc/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-08-01T00:30:32+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255693260 bytes) in 70 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.J3Cl4HQm9A6Ysqc/outputfs/dcmem/backup.tar.gz'
Preparing archive operationOK
Archived 8023 MiB in 4845 seconds [avg 1695 KiB/sec]
You should also rm -Rf /tmp/rear.J3Cl4HQm9A6Ysqc
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.IghdsNlqqJ1cQDq/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-09-01T00:30:19+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255674387 bytes) in 60 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.IghdsNlqqJ1cQDq/outputfs/dcmem/backup.tar.gz'
Preparing archive operationOK
Archived 8081 MiB in 4589 seconds [avg 1803 KiB/sec]
You should also rm -Rf /tmp/rear.IghdsNlqqJ1cQDq
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.cgWM5T19HrXjfjo/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-10-01T00:30:11+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255683399 bytes) in 55 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.cgWM5T19HrXjfjo/outputfs/dcmem/backup.tar.gz'
Preparing archive operationRelax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.0ffuuPyuDrVbKWn/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-11-01T00:30:36+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255660317 bytes) in 57 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.0ffuuPyuDrVbKWn/outputfs/dcmem/backup.tar.gz'
Preparing archive operationOK
Archived 8254 MiB in 5213 seconds [avg 1621 KiB/sec]
You should also rm -Rf /tmp/rear.0ffuuPyuDrVbKWn
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmem.log
Using backup archive '/tmp/rear.RCapTejMYv6yLpx/outputfs/dcmem/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmem.log into initramfs as '/tmp/rear-dcmem-partial-2021-12-01T00:30:25+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255673666 bytes) in 186 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmem.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmem.log as rear-dcmem.log to nfs location
Creating tar archive '/tmp/rear.RCapTejMYv6yLpx/outputfs/dcmem/backup.tar.gz'
Preparing archive operationOK
Archived 8170 MiB in 5694 seconds [avg 1469 KiB/sec]
You should also rm -Rf /tmp/rear.RCapTejMYv6yLpx
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.hFoOToH5m7NJ9Dt/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-02-01T00:30:12+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255719952 bytes) in 43 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.hFoOToH5m7NJ9Dt/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9187 MiB in 2246 seconds [avg 4188 KiB/sec]
You should also rm -Rf /tmp/rear.hFoOToH5m7NJ9Dt
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.aLsHh85Ou8XUfot/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-02-08T14:05:36+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255739940 bytes) in 60 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.aLsHh85Ou8XUfot/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9813 MiB in 2325 seconds [avg 4322 KiB/sec]
You should also rm -Rf /tmp/rear.aLsHh85Ou8XUfot
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.3V6E583td6ygleh/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-02-10T09:59:23+11:00.log'
Copying files and directories
You should also rm -Rf /tmp/rear.3V6E583td6ygleh
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
You should also rm -Rf /tmp/rear.Q1jv3zLqMD8r9g7
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.KtnfOjEcFAMcn1h/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-02T14:53:18+11:00.log'
Copying files and directories
You should also rm -Rf /tmp/rear.KtnfOjEcFAMcn1h
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.8qLjYDRpeVkzr15/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-02T14:57:07+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255727814 bytes) in 49 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.8qLjYDRpeVkzr15/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9206 MiB in 2140 seconds [avg 4405 KiB/sec]
You should also rm -Rf /tmp/rear.8qLjYDRpeVkzr15
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.hNG4OeovrqtzlMt/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-03T07:48:59+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
You should also rm -Rf /tmp/rear.hNG4OeovrqtzlMt
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.23R9Qg54XMtAmm2/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-03T07:53:05+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255738478 bytes) in 50 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.23R9Qg54XMtAmm2/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8531 MiB in 1956 seconds [avg 4466 KiB/sec]
You should also rm -Rf /tmp/rear.23R9Qg54XMtAmm2
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.p73ADtYjCpS2pOz/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-03T14:40:50+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256607656 bytes) in 52 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.p73ADtYjCpS2pOz/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8533 MiB in 1929 seconds [avg 4529 KiB/sec]
You should also rm -Rf /tmp/rear.p73ADtYjCpS2pOz
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.8NpPymcWKEAY3QJ/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
You should also rm -Rf /tmp/rear.8NpPymcWKEAY3QJ
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.ktcqSjuyA9CCQ7f/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-09T16:33:05+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255744977 bytes) in 39 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.ktcqSjuyA9CCQ7f/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationYou should also rm -Rf /tmp/rear.ktcqSjuyA9CCQ7f
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.6EWBBRLEJjCx3Gi/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-03-09T17:02:22+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256592029 bytes) in 33 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.6EWBBRLEJjCx3Gi/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8206 MiB in 1886 seconds [avg 4455 KiB/sec]
You should also rm -Rf /tmp/rear.6EWBBRLEJjCx3Gi
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.3nhzeLjrEAROL35/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-04-01T00:55:15+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255738848 bytes) in 32 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.3nhzeLjrEAROL35/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8362 MiB in 2707 seconds [avg 3163 KiB/sec]
You should also rm -Rf /tmp/rear.3nhzeLjrEAROL35
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.iiV31AjeQCnlLgZ/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-04-29T08:47:54+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255681793 bytes) in 43 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.iiV31AjeQCnlLgZ/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8617 MiB in 2005 seconds [avg 4401 KiB/sec]
You should also rm -Rf /tmp/rear.iiV31AjeQCnlLgZ
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.0A2HSL1XsYe73Lz/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-05-01T00:55:33+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255680427 bytes) in 41 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.0A2HSL1XsYe73Lz/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8579 MiB in 2246 seconds [avg 3911 KiB/sec]
You should also rm -Rf /tmp/rear.0A2HSL1XsYe73Lz
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.aDWICxDFVExdq01/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-05-03T14:36:58+10:00.log'
Copying files and directories
You should also rm -Rf /tmp/rear.aDWICxDFVExdq01
rear mkbackup failed, check /var/log/rear/rear-dcmnw.log for details
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.Fdcx1pbrG8ocQFR/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-05-03T14:40:45+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255677647 bytes) in 47 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.Fdcx1pbrG8ocQFR/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8634 MiB in 2108 seconds [avg 4194 KiB/sec]
You should also rm -Rf /tmp/rear.Fdcx1pbrG8ocQFR
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.c8a1hi2Lqk6DQOD/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-05-04T10:13:50+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255677383 bytes) in 47 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.c8a1hi2Lqk6DQOD/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9129 MiB in 2079 seconds [avg 4496 KiB/sec]
You should also rm -Rf /tmp/rear.c8a1hi2Lqk6DQOD
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.lVsDw216TEN0cCC/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-05-04T11:20:52+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256596061 bytes) in 49 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (254M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.lVsDw216TEN0cCC/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9366 MiB in 2171 seconds [avg 4417 KiB/sec]
You should also rm -Rf /tmp/rear.lVsDw216TEN0cCC
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.Fiq3d68wSmkGfhS/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-06-08T08:17:54+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (255705303 bytes) in 33 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (253M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.Fiq3d68wSmkGfhS/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8861 MiB in 2009 seconds [avg 4516 KiB/sec]
You should also rm -Rf /tmp/rear.Fiq3d68wSmkGfhS
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.dgZx9TY5bbwtviq/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-07-01T00:55:16+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256803625 bytes) in 33 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.dgZx9TY5bbwtviq/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9101 MiB in 2341 seconds [avg 3981 KiB/sec]
You should also rm -Rf /tmp/rear.dgZx9TY5bbwtviq
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.VOachVD903Swn71/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-08-01T00:55:24+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256815201 bytes) in 56 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.VOachVD903Swn71/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8688 MiB in 3327 seconds [avg 2674 KiB/sec]
You should also rm -Rf /tmp/rear.VOachVD903Swn71
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.8jbsgOq5nsBTsv8/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-09-01T00:55:19+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256800386 bytes) in 48 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.8jbsgOq5nsBTsv8/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8642 MiB in 2115 seconds [avg 4184 KiB/sec]
You should also rm -Rf /tmp/rear.8jbsgOq5nsBTsv8
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.8A93jjDE1oVoebq/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-10-01T00:55:20+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256833012 bytes) in 46 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.8A93jjDE1oVoebq/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8727 MiB in 2217 seconds [avg 4030 KiB/sec]
You should also rm -Rf /tmp/rear.8A93jjDE1oVoebq
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.XerAxXMgSW9pINw/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-11-01T00:55:23+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256812463 bytes) in 43 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.XerAxXMgSW9pINw/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 9137 MiB in 2167 seconds [avg 4317 KiB/sec]
You should also rm -Rf /tmp/rear.XerAxXMgSW9pINw
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.z6E8iMqMAqigVe6/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2022-12-01T00:55:21+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256827572 bytes) in 41 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.z6E8iMqMAqigVe6/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8713 MiB in 2681 seconds [avg 3328 KiB/sec]
You should also rm -Rf /tmp/rear.z6E8iMqMAqigVe6
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.Q8TLRhrYTq8Ri6F/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2023-01-01T00:55:19+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256820304 bytes) in 41 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.Q8TLRhrYTq8Ri6F/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8595 MiB in 2852 seconds [avg 3086 KiB/sec]
You should also rm -Rf /tmp/rear.Q8TLRhrYTq8Ri6F
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.jYfPwIRTfPpsZjr/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2023-02-01T00:55:21+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256832968 bytes) in 43 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.jYfPwIRTfPpsZjr/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8765 MiB in 2043 seconds [avg 4393 KiB/sec]
You should also rm -Rf /tmp/rear.jYfPwIRTfPpsZjr
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.LZWntViS48aM5rO/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2023-03-01T00:55:21+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (256821447 bytes) in 46 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (255M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.LZWntViS48aM5rO/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8750 MiB in 2062 seconds [avg 4345 KiB/sec]
You should also rm -Rf /tmp/rear.LZWntViS48aM5rO
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.p4RFbGodZyATuld/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2023-04-01T00:55:31+11:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (263847938 bytes) in 40 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (261M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.p4RFbGodZyATuld/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8749 MiB in 2681 seconds [avg 3341 KiB/sec]
You should also rm -Rf /tmp/rear.p4RFbGodZyATuld
Relax-and-Recover 2.3 / Git
Using log file: /var/log/rear/rear-dcmnw.log
Using backup archive '/tmp/rear.7ZUZDvt43kqg6kN/outputfs/dcmnw/backup.tar.gz'
Creating disk layout
Using guessed bootloader 'EFI'
Creating root filesystem layout
Copying logfile /var/log/rear/rear-dcmnw.log into initramfs as '/tmp/rear-dcmnw-partial-2023-05-01T00:55:14+10:00.log'
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Copying all files in /lib*/firmware/
Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
Created initrd.cgz with gzip default compression (263841920 bytes) in 32 seconds
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-dcmnw.iso (261M)
Setting up GRUB_RESCUE: Adding Relax-and-Recover rescue system to the local GRUB 2 configuration.
Skipping GRUB 2 password setup: GRUB_RESCUE_PASSWORD is no longer supported (see default.conf).
Modifying local GRUB 2 configuration.
Finished GRUB_RESCUE setup: Added 'Relax-and-Recover' GRUB 2 menu entry.
Copying resulting files to nfs location
Saving /var/log/rear/rear-dcmnw.log as rear-dcmnw.log to nfs location
Creating tar archive '/tmp/rear.7ZUZDvt43kqg6kN/outputfs/dcmnw/backup.tar.gz'
Preparing archive operationOK
Archived 8815 MiB in 2010 seconds [avg 4491 KiB/sec]
You should also rm -Rf /tmp/rear.7ZUZDvt43kqg6kN